Step 1: Drawing
Draw 3D drawings according to the shape, size, and surface texture requested by the customer and send to customer for confirmation.
Important note: Before making the mold, carefully confirm the 3D and 2D drawings (on size and structure). After the mold starts production, if there is a need to change the size or structure, there will be corresponding mold modification costs.
Step 2: Make a mold
After the customer confirms that there are no issues with the 3D drawings, we will start making molds.
Difficulty: The mold needs to be designed as a three-layer plate ejection structure. After the product molding is completed in production, the middle layer template of the mold needs to be ejected to complete the product demolding. The mold is relatively complex and the mold cost is relatively high.
Step 3: Preparation of raw materials
According to the color requirements of the customer, mix and match the color paste formula, and mix the prepared color paste into transparent raw rubber to produce the specified color raw material, which can be directly used in production.
Step 4: Molding
Accurately weigh the mixed raw rubber according to the weight of each product, and then place it in a silicone glove mold for high-temperature molding and vulcanization to make the silicone collagen material into a solid finished product. It usually takes about 200 seconds to form, and finally, remove the formed silicone gloves from the mold.
Difficulty: The silicone glove mold is relatively large, and the time for raw materials to flow into the solid state forming inside the mold is relatively long; Secondly, when forming and demolding gloves, they need to be forcibly removed one by one from the mold, which takes a long time and affects production efficiency.
Step 5: Trimming
The silicone gloves molded into solid products will have some excess silicone burrs around them that need to be removed with edge removal tools.
Step 6: Quality Inspection Packaging
Perform a full inspection on the silicone gloves after trimming to ensure that the quality meets the standard for shipment. Finally, package and ship them according to the customer's packaging requirements.


